Upload Firmware To Cf; Upload Config To Cf - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

Upload Firmware to CF

To upload firmware to the CompactFlash card, first open the Upload Firmware to CF window by clicking Maintenance
> CF Services > Download & Upload > Upload Firmware to CF.
Figure 10- 14. Upload Firmware to CF window
Enter the file name and path into the space provided, along with the location of the Firmware on the Switch by specifying
the Image ID, and click Start. This will begin the firmware upload from the host to the CompactFlash card for later use.

Upload Config to CF

The user may save a certain configuration setting of the Switch to the CompactFlash for future implementation. Initially,
the user must save the current configuration file to the NV-RAM on the Switch by going to the Save Changes window,
also in the Maintenance folder, and click the Save Configuration button. After the configuration has been saved, the user
should open the Upload Config to CF window by clicking Maintenance > CF Services > Download & Upload >
Upload Config to CF. In the following window, enter a new path name (e.g. c:/3324sri.cfg) in the File Name field and
click Start.
Figure 10- 15. Upload Config to CF window.
Upon initiation of the upload sequence, the following window will appear, notifying the user of the file transfer status and
completion.
Figure 10- 16. Save Settings to CF window
299