D-Link xStack DGS-3324SRi User Manual page 142

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Source IP
Destination IP
DSCP (0-63)
Protocol
To view the settings of a previously correctly configured rule, click
following screen:
The following window is the CPU Access Rule Table for Packet Content.
To remove a previously created rule, select it and click the
Source IP Address - Enter an IP Address for the source IP address.
Destination IP Address - Enter an IP Address mask for the destination IP address.
Select this option to instruct the Switch to replace the DSCP value (in a packet that
meets the selected criteria) with the value entered in the adjacent field.
This field allows the user to modify the protocol used to configure the Access Rule
Table; depending on which protocol the user has chosen in the Access Profile Table.
Figure 6- 86. CPU Access Rule Display (IP)
Figure 6- 87. CPU Access Rule Table (Packet Content).
in the CPU Access Rule Table to view the
button. To add a new Access Rule, click the Add button:
127