Application's Authentication Settings - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

Application's Authentication Settings

This window is used to configure switch configuration applications (console, Telnet, SSH, web) for login at the user level
and at the administration level (Enable Admin) utilizing a previously configured method list. To view the following
window, click Security Management > Access Authentication Control > Application Authentication Settings:
The following parameters can be set:
Parameter
Application
Login Method List
Enable Method List
Click Apply to implement changes made.
Figure 7- 6. Application's Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the
Login Method List and Enable Method List for authentication for users utilizing
the Console (Command Line Interface) application, the Telnet application, SSH
and the Web (HTTP) application.
Using the pull-down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Login Method
Lists window, in this section, for more information.
Using the pull-down menu, configure an application for admin login on the user
level, utilizing a previously configured method list. The Enable Method Lists are
used to promote users with user-level access to Adminstrator-level privileges
using the selected Appilcation stated previously. The user may use the default
Method List or other Method List configured by the user. See the Enable Method
Lists window, in this section, for more information
217