D-Link xStack DGS-3324SRi User Manual page 112

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
UDP Port (514 or
6000-65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the Current System Log Server
window, click the corresponding
Log Servers window, click the
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
Enter the UDP port number used for sending Syslog messages. The default is 514.
Choose Enabled or Disabled to activate or deactivate.
under the Delete heading of the entry to delete. To return to the Current System
Show All System Log Servers
NOTE: For detailed information regarding Log entries that will appear in
this window, please refer to Appendix C at the back of this manual.
link.
97