Stp Instance Settings - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

STP Instance Settings

The following window displays MSTIs currently set on the Switch. To view the following table, click Configuration >
Spanning Tree > STP Instance Settings:
The following information is displayed:
Parameter
Instance Type
Instance Status
Instance Priority
Priority
Click Apply to implement changes made.
Clicking the hyperlinked name will allow the user to view the current parameters set for the MSTI Instance.
Figure 6- 28. STP Instance Settings
Description
Displays the instance type(s) currently configured on the Switch. Each instance type
is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the
Switch.
Displays the current status of the corresponding MSTI ID
Displays the priority of the corresponding MSTI Instance Type. The lowest priority will
be the root bridge.
Click the Modify button to change the priority of the MSTI. This will open the Instance
ID Settings window to configure. The Type field in this window will be permanently set
to Set Priority Only. Enter the new priority in the Priority field and click Apply to
implement the new priority setting.
Figure 6- 29. STP Instance Operational Status – CIST
65