D-Link xStack DGS-3324SRi User Manual page 218

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
The following fields can be set:
Parameter
Interface Name
IP Address
Neighbor Timeout
Interval (1-65535)
Probe Interval (1-
65535)
Metric (1-31)
State
Click Apply to implement changes made. Click
Settings window.
Figure 6- 167. DVMRP Interface Settings – Edit window
Description
Displays the name of the IP interface for which DVMRP is to be configured. This must
be a previously defined IP interface.
Displays the IP address corresponding to the IP Interface name entered above.
This field allows an entry between 1 and 65,535 seconds and defines the time period
DVMRP will hold Neighbor Router reports before issuing poison route messages. The
default is 35 seconds.
This field allows an entry between 1 and 65,535 seconds and defines the interval
between 'probes'. The default is 10.
This field allows an entry between 1 and 31 and defines the route cost for the IP
interface. The DVMRP route cost is a relative number that represents the real cost of
using this route in the construction of a multicast delivery tree. It is similar to, but not
defined as, the hop count in RIP. The default cost is 1.
This field can be toggled between Enabled and Disabled and enables or disables
DVMRP for the IP interface. The default is Disabled.
Show All DVMRP Interface Entries
203
to return to the DVMRP Interface