Configure Authenticator - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

Configure Authenticator

To configure the 802.1X authenticator settings, click Configuration > Port Access Entity > Configure 802.1x Authenti-
cator Parameter:
Figure 6- 102. Configure 802.1X Authenticator Parameter window
To view the 802.1X authenticator settings on a different switch in the switch stack, use the Unit pull-down menu to select
that switch by its ID number in the switch stack. To configure the settings by port, click on the hyperlinked port number
under the Port heading, which will display the following table to configure:
138