xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Rear Panel Description
DGS-3324SRi
The rear panel of the DGS-3324SRi contains an AC power connector, six 10-gigabit stacking ports, a redundant power
supply connector and an available slot to insert the CompactFlash card (storage media accessory).
Figure 1- 7. Rear panel view of DGS-3324SRi
DGS-3324SR
The rear panel of the DGS-3324SR contains an AC power connector, two 10-gigabit stacking ports, a redundant power
supply connector and a system fan.
Figure 1- 8. Rear panel view of DGS-3324SR
DXS-3326GSR
The rear panel of the DXS-3326GSR contains an AC power connector, an optional module slot for uplinking a 2-port
module, two 10-gigabit stacking ports, a redundant power supply connector and a system fan.
Figure 1- 9. Rear panel view of DXS-3326GSR
DXS-3350SR
The rear panel of the DXS-3350SR contains an AC power connector, an optional module slot for uplinking a 2-port
module, two 10-gigabit stacking ports, a redundant power supply connector, a RS-232 DCE console port for Switch
management and a system fan.
Figure 1- 10. Rear panel view of DXS-3350SR
The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector
of the provided power cord into this socket, and the male side of the cord into a power outlet. The Switch automatically
adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
The rear panel also includes an outlet for an optional external power supply. When a power failure occurs, the optional
external RPS will immediately and automatically assume the power supply for the Switch.
7