Stacking Information - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

Stacking Information

To change a switch's default stacking configuration (for example, the order in the stack), see Box Information in the
Configuration folder.
The number of switches in the switch stack (up to 12 total) are displayed in the upper right-hand corner of your web-
browser. The icons are in the same order as their respective Unit numbers, with the Unit 1 switch corresponding to the icon
in the upper left-most corner of the icon group.
When the switches are properly interconnected through their optional Stacking Modules, information about the resulting
switch stack is displayed under the Stack Information link.
To view the stacking information, click on the Stacking Information link from the Monitoring folder:
The Stacking Information window holds the following information:
Parameters
Box ID
User Set
Type
Exist
Priority
Figure 9- 10. Stacking Information window
Description
Displays the Switch's order in the stack.
Box ID can be assigned automatically (Auto), or can be assigned statically. The
default is Auto.
Displays the model name of the corresponding switch in a stack.
Denotes whether a switch does or does not exist in a stack.
Displays the priority ID of the Switch. The lower the number, the higher the priority.
The box (switch) with the lowest priority number in the stack denotes the Master
switch. The DGS-3324SRi will always be the master switch in a Star topology.
260