D-Link xStack DGS-3324SRi User Manual page 117

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
The following parameters can be set, for the Ethernet type:
Parameter
Profile ID (1-8)
Type
VLAN
Source MAC
Destination MAC
802.1p
Ethernet type
Figure 6- 59. Access Profile Configuration (Ethernet) window
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 8.
Select profile based on Ethernet (MAC Address), IP address, packet content mask or
IPv6. This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
•
packet header.
Select IP to instruct the Switch to examine the IP address in each frame's
•
header.
Select Packet Content Mask to specify a mask to hide the content of the
•
packet header.
Select IPv6 to instruct the Switch to examine the IPv6 part of each packet
•
header.
Selecting this option instructs the Switch to examine the VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
Selecting this option instructs the Switch to examine the 802.1p priority value of each
packet header and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in each
frame's header.
102