D-Link xStack DGS-3324SRi User Manual page 139

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
To establish the rule for a previously created CPU Access Profile:
In the Configuration folder, click the CPU Access Profile Table to open the CPU Access Profile Table.
Figure 6- 80. CPU Access Profile Table
In this window, the user may add a rule to a previously created CPU access profile by clicking the corresponding Modify
button of the entry to configure, Ethernet, IP, Packet Content or IPv6. Each entry will open a new and unique window,
as shown in the examples below.
Figure 6- 81. CPU Access Rule Table (Ethernet)
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a previously
created rule, click the corresponding button. The following window is used for the Ethernet Access Rule configuration.
Figure 6- 82. CPU Access Rule Configuration – Ethernet
To set the CPU Access Rule for Ethernet, adjust the following parameters and click Apply.
124