xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Authenticator Statistics
This table contains the statistics objects for the Authenticator PAE associated with each port. An entry appears in this table
for each port that supports the Authenticator function. To view the Authenticator Statistics, click Monitoring > Port
Access Control > Authenticator Statistics.
The user can specify a switch in a switch stack using that switch's Unit ID by using the pull-down menu in the top left
hand corner. The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s"
stands for seconds. The default value is one second.
The following fields can be viewed:
Parameter
Port
Frames Rx
Frames Tx
Rx Start
TxReqId
RxLogOff
Tx Req
Rx RespId
Rx Resp
Figure 9- 20. Authenticator Statistics window
Description
The identification number assigned to the Port by the System in which the Port
resides.
The number of valid EAPOL frames that have been received by this Authenticator.
The number of EAPOL frames that have been transmitted by this Authenticator.
The number of EAPOL Start frames that have been received by this Authenticator.
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
The number of EAPOL Logoff frames that have been received by this Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.
The number of EAP Resp/Id frames that have been received by this Authenticator.
The number of valid EAP Response frames (other than Resp/Id frames) that have
been received by this Authenticator.
272