ProScan PS34190 Owner's Manual page 51

Audio Connections
Surround Sound
Consult the amplifier owner's manual for the manufacturer's
recommended hookup.
1. Use this Connection to:
1
a.
B.
1
1
Receive more surround sound volume than the TV's
Surround Sound Speaker terminals allow.
Accessories Needed
Order form is on pages 53-54.
One audio/video cable
Two audio/video cables and a Y-adapter if your
amplifier does not have a MONO jack.
Connect as Shown
Connect the AUDIO OUTPUTS SURROUND jack to
the MONO jack on the stereo amplifier.
If desired, you can connect one set of surround speak-
ers to the TV and another set of surround speakers to
an amplifier that is connected to the TV.
Operation
Select Normal or Phantom prologic, or Matrix, Hall, or
Stadium surround as described on pages 24-25. Set the
surround sound volume to mid-range with the Rear
Volume in the Audio Setup menu of the mode you
selected. Adjust the amplifier so the surround sound
is at a normal listening level.
Center Sound Audio
CoT_sult the amplifier owner's manual for the manufacturer's
recommended hookup.
1. Use this Connection to:
Receive more center sound volume than the TV allows.
2. Accessories Needed
Order form is on pages 53-54.
A. One audio/video cable
B. Two audio/video cables and a Y-adapter if your
amplifier does not have a MONO jack.
3. Connect as Shown
Connect AUDIO OUTPUTS CENTER to the MONO
input jack on the stereo amplifier. If your amplifier
does not have a MONO jack, you may need a Y-
adapter to hear sound from both channels.
4. Operation
Select Dolby3 or Normal Prologic in the audio mode
menu as described on pages 27-28.
Adjust the volume of center sound in the Dolby3 or
Normal Prologic setup menus as shown on pages 27-28.
Back of TV
Amplifier
Back of TV
Stereo Amplifier
am
49