ProScan PS34190 Owner's Manual page 5

6. Set the Time.
A. Press MENU to bring up the Main Menu.
B. Highlight Clocks and Timers using the
remote's up and down arrows.
C. Select Clocks and Timers to enter the
('.locks and Timers menu.
D. Highlight and Select Set Time.
E. Enter the Time using the number buttons
and by following the menus on the screen.
7. Adjust PICTURE TILT.
Picture tilt is used to correct a tilted picture
from the effect of the Earth's magnetic field on
a large picture tube. The PICTURE TILT
STRENGTH and POLARITY switches on the
back of the TV compensate for this effect. If
the picture appears tilted, follow these steps
to improve it.
1. lVlake sure STRENGTH switch is in the
OFF position.
2. Move STRENGTH switch to the LOW
position. If this does not fully improve tilt,
move STRENGTH switch to HIGH, This
should correct tilt. If moving STRENGTH
'switch makes tilt worse, return it to OFF
and go to the next step.
3. Change the position of POLARITY switch.
If this improves the tilt but does not fully
:improve it, move the STRENGTH switch
to LOW or HIGH. This should correct tilt.
You may need to reset the switches if the TV
is moved or repositioned in the room.
PICTURE TILT
STRENGTH
HIGH
LOW
OFF
P_CTURE TILT
POLARITY
3