ProScan PS34190 Owner's Manual page 39

Setting the Sleep, Event, or Display Timer
You can set your TV to turn itself off at a specific time. If you're
watching TV at night and fall asleep, the TV will turn off for you.
Set Sleep Timer.
A. Press "IV to set the remote to control the TV.
B. Press MENU to bring up the main menu.
C. Highlight Clocks and Timers using the up and clown arrows on the
_:emote. These arrows ;are also shown on the screen.
D. Press 8 to select the Clocks and Timers menu.
E. J_ghlight Sleep Timer.
F. Press 8 to select Sleep Timer.
G. Enter the amount of time using the remote's number buttons. If you
enter a wrong number, use the GLEAF{button to erase the number.
Then enter the new number.
H. Press 3 to exit.
Change or add the time amount.
A. Follow steps A-F to enter a new time.
B. Enter the amount of time using the remote's number buttons.
C. Press 3 to exit.
Set the Event Timer or Display Time.
If you set the Event timer,, the TV will notify you after a specified
amount of time has elapsed by displaying the time and the TV status
on-screen. An hourglass will also appear with the TV status dispay.
If you set the Display time, the TV will repeatedly notifiy you at specific
time intervals by displaying the time and TV status on-screen.
Follow the steps below to set one or both of these features.
A. Press -IV to ,.setthe remote to control the TV.
B. Press MENU to bring up the main menu.
C. Highlight Clocks and Timers using the up and down arrows on the
remote. These arrows are also shown on the screen.
D. Press 8 to select the Clocks and Timers menu.
E. Highlight the timer you want to set. Press 8 to select the timer.
F. Use the number buttons to enter the time.
G. Press 3 to exit.
37