ProScan PS34190 Owner's Manual page 33

Adjusting Sound Levels and Speaker Balance
To adjust one of the 3 items shown below, follow these four steps then
adjust to your preference.
1. Press MENU to bring up the main menu.
2. :Highlight Audio using the up and down buttons on the remote. Press 8 to
select audio.
3. Highhght one of the items shown below using the up and down buttons on
_:heremote. Press 8 to select the item.
4. Use the menu buttons shown on the screen to select and adjust the the
audio mode you have chosen.
Headphone Volume
You can attach a set of headphones to the TV. Headphone volume
adjusts the volume level for the headphones.
Press the right arrow to increase the sound level. Press the left arrow
to lower the sound level.
If your headphones do not fit in the headphone jack, an adapter can be
used. The adapters can be found at your local electronics store.
Balance
Adjusts the sound between the left and right speakers.
Press the right arrow to hear more sound from the right speaker.
Pr_:ss the left arrow to hear more sound from the left speaker
Volume Limiter
Sets the limit on maximum volume level. The TV's volume level will
not rise any higher than the level set. This is useful if you have
children and you do not want them to raise the volume higher than
what you select.
31