Basic Connection - ProScan PS34190 Owner's Manual

VCR Basic Connection
1. Use this Connection to:
Receive Stereo Broadcasts from a Stereo VCR
Hear Stereo Playback from a Stereo VCR
Use the picture from the VCR for the small
PIP (picture-in-picture).
2. Accessories Needed
Order form is on pages 53-54.
A. One coaxial cable
B. Two audio/video cables for mono VCRs
or three audio/video ,cables for stereo
VCRs
C. One S-Video cable if tlhe VCR has an
S-VHS or S-VIDEO connector.
m
Connect as Shown
A second component ,can also be
connected to ANT B and the
Audio!Video Input 2 jacks.
4. Operation
The TV remote's VCR1 and VGR2 buttons
may be able to turn on your VCR as well as
provide basic operation. ,Seepage 12for
programming the remote for your VCR.
5. Follow the Steps in the Startup
section on pages 2-3.
A
IN FROM ANT
Back of VCR
AUDIO VIDEO
OUT
Back of TV
45