ProScan PS34190 Owner's Manual page 31

Setting Up Phantom Prologic
Select Phantom Prologic Mode.
Select Phantom, Prologic so your TV will automatically produce
cleaner dialog and better stereo imaging when stereo is beoadcast.
1. Press MENU to bring up main menu.
2. Highlight Audio using tile up and down buttons on the remote.
Press 8 to select audio.
3. Highlight Mode using the up and down buttons on the remote.
Press 8 to select Mode.
4. Use the arrow keys to select Phantom Prologic Surround Sound.
5. Use the information below to set Phantom Prologic to your personal
preference.
Set up Phantom Prologic.
1. Press MENU to bring up the main menu.
2. Highlight Audio using the up and down buttons on the remote.
Press 8 to select audio.
3. Highlight Set:up using the up and down buttons on the remote.
Press 8 to select Setup.
4. Use the menu buttons shown on the screen to select and adjust the
Phantom Prologic setup.
Speakers:
Vclume:
Balance:
Rear Speakers:
Rear Volume:
Input Balance:
Noise Sequencer:
Select Internal to listen to the TV's built-in speakers. Select
External if you have connected external speakers to the
EXTERNAL speaker terminals on the back of the TV.
Set to your personal preference. Use right and left arrows to
increase or decrease the volume.
Adjust the left!fight balance until the sound seems to
originate from a point halfway between the speakers.
Set rear speakers to On to hear sound from the rear
surround speaker(s).
Set to your personal preference. Use right and left arrows to
increase or decrease the volume of the rear speakers.
Used to balance the left and right audio signals coming into
the set for the best surround sound performance. Most of
the time you will want to leave this at mid scale. If the
sound coming from your surround sound speaker(s) has a
lot of voices, you may want to adjust this display to mini-
mize the voices. Stop at the point where voices are minimal
in the surround speaker(s).
Turn on to individually adjust each speaker channel (left,
right, and center) one at a time. This allows you to check
and adjust the volume level and balance to each channel as
well as check to see if all the speakers are working correctly.
29