ProScan PS34190 Owner's Manual page 15

Using the Remote with VCRs
If the remote operates your VCR, this page and the next will show you
how to use it for basic functions.
Turn on the VCR.
A. Press VCR1 or VCR2 to set the remote to
control the VCR.
B. Press OFF/ON to turn on the VCR if it did
not turn on ,when you pressed VCR1 or
VCR2.
Turn off the VCR.
A. Press VCR1 or VCR2 to set the remote to
control the VCR.
B. Press OFF/ON.
Watch a tape in your VCR.
A. Turn on VCR.
B. Insert a tape in the VCR.
C. Press PLAY to start the tape.
D. Press STOP when you are finished.
E. Press REW to rewind the tape.
Record one TV program and
watch another.
A. Press VCR1 or VCR2 to set the remote to
control the VCR.
B. Tune the VCR to the channel you want to
record using CHANNEL up and down or
pressing two number buttons.
C. Press REC (Record) to start recording.
D. Press TV/VCR on the VCR. You may be
able to use the remote's ANT button
instead of the VCR's TV/VCR button.
E.
F.
Press TV to set the remote to control the
TV.
Press CHANNEL up or down to change
channels on the TV.
G. To see the channel you are recording, tune
the TV to channel 3 or 4 (same as the
CH3/4 switch on the VCR). Pressing
VCR1 or VCR2 may do the same thing if
the Autotune feature has been set as shown
on page 1,1.
13