ProScan PS34190 Owner's Manual page 34

Adjusting Channel Audio
In the Channel Audio menu, you can select
the preferred audio program for each
channel.
Your TV is capable of receiving stereo as well
as programs broadcast in a second language
(SAP). In Channel Audio, you can set specific
charmels for audio in normal stereo or SAP.
If you know a channel is louder or softer than
some other channels, you can setup the audio
to compensate for the loudness or quietness.
Follow the steps below to set the channel
audio to your personal preference.
a.
Press -IV to set the remote to control the
TV.
B. Press MENU to bring up the main menu.
C. Highlight Installation using the up and
down arrows on the remote. These
arrows are also shown on the screen.
W.
E.
F.
G°
H.
Press 8 to select the Installation menu.
Highlight Channel Audio. Press 8 to
select Channel Audio.
Enter the channel number using the left
and right arrows or the GHANNEL
upidownbuttons. The antenna input
you are using will be appear next to the
channel.
Use the down arrow to highlight
Preferred Audio. Use the left or right
arrow to check the Normal or SAP box.
Select normal for normal stereo or SAP
for a second language.
Use the down arrow to highlight,
This
channel is usually.
Use the left or
right arrow to select Loud, Quiet or OK.
I. Press 3 to exit.
32