Chapter Two; Connecting Yourvcr; $ Connectingtheantennaor Cable To The Vcr; Connectingcable Antennas - Mitsubishi HS-U520 Owner's Manual

,_CHAPTER TWO
Connecting YourVCR
Now that you're familiar with some of your VCR's features, you're
ready to connect the antenna and the television. You won't have
to complete all of the connections you see in this chapter -- make
only those connections that apply to your eqmpment.
You should keep in mind that there are two s_eps you need to
take to connect your VCR: first, connect the antenna or cable to
the VCR, then connect the VCR to the television.
Connecting the Antennaor Cable to the V,3R
$ Connecting the Television
Connecting the AN Network(optional)
$ ConnectingtheAntennaor Cable to the VCR
The first thing you need to do is connect the antenna or cable.
Because there are at least three different tyt:es of antennas, this
chapter will show how to connect all of them. You don't need to
make all the connections. First, find out what kind of antenna you
have. Then, make the connection for that type of antenna. You
can then go to the next sectic,n, "Connecting Lhe Television."
This section shows you:
• Connecting cable antennas,
• Connecting other antennas, and
• Connecting separate UHF/VHF antennas.
Connectingcable antennas
If you have cable TV, this is the only antenna you need to hook
up. Because some cable companies require a cable box (for un-
scrambling cable signals), there are two ki:nds of cable connec-
tions shown: with and without a cable box.
connecting cablewithouta cablebox
0
0
Find the "source" cable. [t usually come,; out of the floor or out
of a wall. If it is connected to your TV, disconnect it.
Connect the cable to the ANTENNA IN terminal on the back
of your VCR. Screw or posh the cable or=to the terminal until
it is tight.
When you are finished,
go to page 15, "C'onnecting
the Televi-
sion."
11