Mitsubishi HS-U520 Owner's Manual page 20

Chapter 2: Connecting YourVCR Connecting theAN Network(optional) ( cont.)
To connect the A/V Network:
O
Connect a cable to the terminal on the TV labeled A/V NET-
WORK OUT or ACTIVE A/V NETWORK. Connect the other
end of the cable to the term:thai on the VCR labeled ACTIVE
A/V NETWORK IN.
O
If you have another Mitsubishi componer:t equipped with A/V
Network, attach a cable to the terminal on _oheVCR labeled
ACTIVE A/V NETWORK OUT. Attach the other end of this
cable to the terminal on the other component labeled A/V
NETWORK IN or ACTIVE A!V NETWORI4: IN.
BACK PANEL
(VCR)
ACTIVE
IAN. NETWO___.RK4
[; ;/
0
BACK PANEL BACK PANEL.
(Other Mitsubishi component) (Mitsubishi TV)
I;;/ I;;J
°i I
TV VCR
,II ; i output input 'f -_ _'-'°_ ..... _ output
____j
_>Important: Never connect your A/V Network in a loop, as shown above.
connecting ActiveAN Network
Your VCR has the ability to perform certain automated functions
in conjunction with Mitsubishi TVs that have ACTIVE A/V
NETWORK terminals. These automated functions are called
"Active A/V Network."
In order for Active A/V Network to function properly, you must
make the connections above arid your VCR must be connected to
the EXT-1 input terminals of your Mitsubishi 'IW. Information on
how to use the Active A/V Network features b_!:gins on page 56.
18