Chapter Three; Operating Yourvcr; Setting Up Your Vcr For The First; Setting Up Your Vcr If You Are Using A Tv - Mitsubishi HS-U520 Owner's Manual

A CHAPTER THREE
Operating YourVCR
Now that you've completed your antenna, VCP, and TV connec-
tions, you're ready to start enjoying your equipment. To get, the
most satisfaction out of your VCR, you shou_Ld carefully read the
two sections, "Setting Up Your VCR for the Fi:st Time" and
'%iewing the Picture Coming from Your VCR." Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
Setting Up YourVCR for the First Time
Using the RemoteControl
Viewing the Picture Comingfrom Your VCR
$ Loadingand UnloadingTapes
$ Playing a Tape
Selectingthe On-screenLanguage
Using the Menusto Set the Time
Programmingthe VCRto ReceiveTV Chafmels
$ Using the Audioand Video Functions
$ Recording
Setting UpYourVCRfor the FirstTime
It's important that your VCR is set up correctly before you try to
use it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your _ystem.
This section teaches you about:
• Setting up your VCR if you are using a TV without Audio
and Video Inputs.(Older TV), and
• Setting up your VCR if you are using an TV with Audio and
Video Inputs (Modern TV).
Before you begin, you should:
• have completed your antenna, VCR, and TV connections.
Setting up your VCR if you are using a TV wilhoutAudio and Video
inputs(OlderTV)
0 Turn on your TV and tune it to channel 3 or 4, whichever is
NOT used for broadcast in your area.
19