Copy Of A Tape; Vcr - Mitsubishi HS-U520 Owner's Manual

Chapter4: UsingtheAdvanced Features
Making a Copyof a Tape
There are two basic ways to make a copy of a tape. One way is to
use the HS-U520 to play a tape and use another VCR to record.
The other way is to use another VCR to play a tape and the
HS-U520 to record.
Whichever method you choose, you will need one RCA audio cable
and one RCA video cable to connect the two VCRs. If you do not
have these cables, they are available at your local electronics
retailer. In this section you'll learn:
• Using your HS-U520 to record from another VCR, and
• Using your HS-U520 to play back to another VCR.
UsingyourHS-U520 to record from another V CR
HS-U520 IRECORDINGI
ooo
[ PLAYBACK ]
ttt
AUDIO OUT R40 _---VlDEO
AUDIO OUT L--_.J
0
0
Connect one RCA audio cable to the AUDIO
OUTPUT terminal on the other VCR.
Connect the other end of this cable to the
AUDIO INPUT terminal on the HS-U520
(labeled L/MONO). If the other VCR is
mono, this is the only audio connection
necessary.
If the other VCR has stereo outputs, con-
nect another RCA audio cable to the AUDIO
OUTPUT terminal of the playback VCR.
°Connect the other end of this cable to the
AUDIO INPUT terminal on the HS-U520
(labeled R).
O
O
O
If you attached the connection cables to the
back of the HS-U520, use the INPUT
button to set the HS-U520 to External ].
(L1). If you attached the cables to the front
of the HS-U520, use th,; INPUT button to
set the HS-U520 to External 2 (L2).
Put a blank tape into the HS-U520 and find
where you want to begin recording. Press
PLAY/STOP.
Put the tape you want to copy into tlhe other
VCR and find the place from which :you
want to begin copying. Press STOP.
O
Connect a video cable to the VIDEO OUT-
PUT terminal on the playback VCR. Con-
nect the other end of this cable to the
VIDEO INPUT terminal on the HS-U520
(labeled VIDEO IN).
On the HS-U520, press REC or REC/OTR,
then PAUSE.
On the other VCR, press PLAY, then
PAUSE.
If the other VCR is a Hi-Fi deck, set the
audio monitor to "STEREO."
_) Release the PAUSE button
on both VCRs at
the same time.
O When finished, press PLAY/STOP (or
STOP) on both VCRs.
58