Table of Contents
Advertisement
Chapter 3: Operating YourVCR
SettingUp YourVCRlor the FirstTime(cont.)
Important:
0
If you tuned the TV to charmel
4 in step O, press the CHAN-
NEL A button
and the ONE KEY PROGRAM
button
on the
front panel at the same time with the VCR turned
off. The
word "Ant ch4" will display
on the front panel
display
and the
VCR will send signals
on channel
4. (Ifyo_
tuned the TV to
channel
3, you don't need to do this.)
O
Turn the VCR on by pressing
the POWER
button.
The VCR will return
to its initial setting
(channel
3) if you press
the CHANNEL
•
button
and the ONE KEY FROGRAM
button
on the front panel at the same time with the VCR turned
off.
Setting upyour VCRif you are using a TV equippedwith Audio and
Video Inputs(ModernTV)
0
Turn on your TV and switch
it to the correct external
input.
(For most Mitsubishi
TVs, this means
pres sing the TV's
INPUT
button
until you see the words "Ext-l"
or "Input-l"
on
the screen.)
Turn the VCR on by pressing
the POWER
button.
Usingthe RemoteControl
In this section, you'll learn how to set up and use your remote
control.
This section includes:
• Using the remote control
to operate
tile VCR, and
• Using the remote control
to operate
the TV.
Using the remotecontrol to operatethe VCR
installing thebatteries
0
Unpack
two AAA size batteries.
O
To remove the back cover, press the ridged area gently,
then
push the cover in the direction
of the arrow and lift.
O
Load the batteries:,
making
sure the polarities
(+) and (-) are
correct.
operating the remote control
The HS-U520
has two VCR operation
modes: VCR-A mode and
VCR-B mode.
The HS-U520
is pre-set
to VCR-A operation
mode.
0
Set the TV/VCR slide switch on the remote
control
to VCR
position.
This "tells" the remote
that you want to control
the
VCR.
20
Hide quick links:
Advertisement
Table of Contents
