Mitsubishi HS-U520 Owner's Manual page 44

Chapter3: Operating YourVCR Recording (cont.)
_Important:
/i _-
0 Day - -
0 Sl:art zime
0 S1;op Zime
ORecord speed AUTO
CH DAY
2 MOI7
IO TH20
7 E-HE
29 FR21
8 TU25
3:3 M-F
15 SA 6
46 SU23
ON OFF
ll:30a I:30pSP
9:00pIO:OOPEP
8:00a 9:00aEP
5:30p 5:45PEP
ll:OOP 0:30aSP
7:OOP 7:15pEP
8:00p 9:00pEP
7:00a 9:00aSP
Important:
If you press CANCEL or REW while the channel number is
flashing, you will cancel the entire program. If you want to stop
using One Key Programming before completing the programming,
press the MENU button on the remote control.
Using Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies
the process of programming your VCR to record. When you press
the QUICK PROGRAM button on the remote control, you will
immediately see the "Program to record" menu and can begin
programming right away.
You can use this feature even when the VCR is ,;topped, playing,
recording, fast forwarding, rewinding, or off. However, the:
QUICK PROGRAM button does not. function during One Key
Programming.
Quick Program is also an "Active AJ_ Network" feature. If you
have a Mitsubishi TV with Active A!V Network, see page 56 for
more information.
To use quick program:
O
Press the QUICK PROGRAM button on the remote control. If
the VCR is off, it will turn on. After tuning )'our TV to the
correct channel or input, you will see the "Program to record"
screen, unless the VCR's memory is full.
If the VCR's memory is full, you will see the recap screen
(below left) instead of the "Program to record" screen. You. will
need to use the CANCEL button to erase an entry before you
can add another one.
O
Complete programming as described in "]?rogramming your
VCR to record." When you are finished:, press the QUICK
PROGRAM button again. If the VCR is sl:opped, it will turn
off and be ready to record your program at a later time. If the
VCR is playing, recording, fast forwarding or rewinding, the
menus will turn off, but the VCR power will remain on.
When you are finished with all programming, be sure the
VCR power is OFF and the programmed recording light i,_ lit.
However, if you have a cable box, leave it turned ON and
tuned to the station you wish to record. Additionally, ifyc,u
are using an A/B switch, remember to ,;et the switch to the
correct position.
If you press the QUICK PROGRAM button, but the clock is not
set, you will see the "Set the clock" menu. If you have set the A/V
Network to ACTIVE, you should point your remote control at the
television when using Quick Program.
42