Tm Feature - Mitsubishi HS-U520 Owner's Manual

Your choices are:
_Prosram to record
r J[ • - • =
IlS[---_4_[ ]llliliv-4=-II_t![ Ikq_l
OFi,-st Time Set-Up
OVideo mute (ON )
OAuto D.S.T. (OFF)
OAuto power save (OFF)
ORF
converter (ON )
(AUTO)
A/V Network (OFF)
Band
Hish ...... l
Mid ..... 1
Low .... 1
r_
.
" --
Usingthe PerfecTape
TM
feature
PerfecTape
TM
is an exclusive Mitsubishi feature that tests the
quality of your video tapes. After each test, the VCR will adjust
its internal circuitry in order to make the best possible recording
on your tape.
settingup PerfecTape
TM
You have the option of setting PerfecTape
TM
to function only when
you start a test, or to automatically function eveT:_ time you insert
a tape that has not ye_; been recorded. To do this:
O Press the MENU tmtton on the remote control to display tlhe
'_CR Main Menu."
Use the ADJUST buttons to move the cursor next to "Custom-
ize choices" and press the ENTER button.
The "Customize choices" menu will appem". Use the ADJUST
buttons to select "PerfecTape" option.
0 Press the ENTER button to set "PerfecTa]?e" to AUTO or
MANUAL.
Press the MENU button two times to turn off the menus.
If you set PerfecTape
TM
to AUTO, the VCR will automatically test
any non-recorded tapes you place in the VCR. It will not auto-
matically test recorded tapes - you must choose to test those
yourself.
If you set PerfecTape
TM
to MANUAL, the VCR will not automati-
cally test any tapes. PerfecTape will only function when you
initiate a test.
usingPerfecTape
TM
automatically
Before you begin, you need to:
• have set "PerfecTape" to "AUTO" in the "Customize
choices" menu.
0
Load a tape that has not been recorded into the VCR.
The VCR will display the testing status screen. YVhen testing,
the VCR records for one second, then evaluates the recording
it made. The entire test takes about eight seconds. Dinting
this time, the "PT" light on the t_ont panel _ill flash. If you
wish to cancel the test, press the PLAY/STOP button while
the "PT" light is still flashing.
49