Chapter Two; Connecting Your Vcr; Connectingthe Antennaor Cable To The Vcr; Connecting Cableantennas - Mitsubishi HS-U430 Owner's Manual

A CHAPTER TWO
Connecting Y ourVCR
Now that you're familiar with some of your VCR's features,, you're
ready to connect the antenna and the televisian. You won't have
to complete all of the connections you see in tk.is chapter --. make
only those connections that apply to your equipment.
You should keep in mind that there are two steps you need to
take to connect your VCR: first, connect the antenna or cable to
the VCR, then connect the VCR to the televisi)n.
$ Connectingthe Antennaor Cableto the VC',R
$ Connectingthe Television
Connectingthe Antennaor
VCR Back Panel
Cable to the VCR
The first thing you need to do is connect the antenna or cable.
Because there are at least three different type s of antennas, this
chapter will show how to connect all of them. You don't need to
make all the connections. First, find out what kind of antenna you
have. Then, make the connection for that type of antenna. You
can then go to the next section, "Connecting the Television."
This section shows you:
• Connecting cable antennas,
• Connecting other antennas, and
• Connecting separate UltF/VHF antennas.
Connecting cableantennas
If you have cable TV, this is tile only antenna you need to hook
up. Because some cable companies require a cable box (for un-
scrambling cable signals), there are two kinds of cable connec-
tions shown: with and without a cable box.
connecting cablewithouta cablebox
O Find the "source" cable. It usually comes out of the floor or out
of a wall. If it is connected to your TV, dis connect it.
O Connect the cable to the ANTENNA IN terminal on the back
of your VCR. Screw or push the cable onto the terminal until
it is tight.
When you are finished, go to page 15, "Connecting the Televi-
sion."
11