KitchenAid KGRT507 Use And Care Manual page 17

ii_ ,_ingand Caring forYour Cooktop
5. If the surface light still does not work,
you may need to replace the starter. The
starter is a knob-shaped part located on
the right side of the backguard, under the
light tube.
ilJJiiiJiiJiiiii_
..... iJ i
I
/
To remove and replace the starter, first
remove light tube. Push starter in and
turn approximately 90 ° counterclockwise.
Pull starter out of recessed area. You
can find replacement starters at stores
that sell fluorescent light tubes.
6. Replace glass and close the top panel.
7. Plug in range or reconnect power.
17