KitchenAid KGRT507 Use And Care Manual page 14

i_i_il _!_ i:!iiii _ing and Caring forYour Cooktop
Adjusting the height of top burner
flames
The LO burner flame should be a steady
blue flame approximately 1/inch (6 mm)
high. It can be adjusted using the
adjustment screw in the center of the valve
stem. The valve stem is located directly
underneath the control knob.
To adjust the flame height follow the in-
structions below:
1. Turn the control knob to "LO."
2. Remove the control knob. (If there is not
an adjustment screw underneath the
knob the flame height is not adjustable.)
3. Hold the valve stem with a pair of pliers.
The screw is located in the center of the
valve stem. Use a small fiat head screw-
driver to turn the screw until the flame is
the proper size.
4. Replace the control knob.
........ Adjustment screw
......... Valve stem
5. Test the flame by turning the control from
"LO" to "HI," checking the flame at each
setting,
Low flame
'_-_ !.n_l Ln_l Ln_l Ln_l I_rLI
High flame
Q-_ 'm_l t.n..! t.n..! t.n..! LnJ
o
14