Table of Contents
Advertisement
3-20
Option Installation
Installing a DIMM
Install a memory module by performing the following steps:
1.
Remove the system unit cover (see "Removing the System Unit Cover").
2.
If you need to remove a currently installed memory module, see "Removing a
DIMM."
3.
Align the new module with an empty memory socket. Make sure the notches on
the module align with the keys in the socket.
Press the module firmly into the socket (see Figure 3-17).
4.
5.
Make sure the locking clips at either end of the module click closed.
CAUTION: Before you install a module, reduce
static discharge by touching the system's metal
chassis.
Figure 3-17 Inserting a DIMM
Advertisement
Table of Contents
Troubleshooting
