Table of Contents
Advertisement
4. Carefully rock the DIMM to pull it from the socket.
A – Plastic Clip
5. Store the module in an antistatic bag (available at
electronic supply stores) or a cardboard box.
Installing a DIMM
Use the following procedure to install a DIMM.
1. Remove the access cover (see "Removing the Access
Cover").
2. Locate the DIMM sockets.
3. Remove any currently-installed DIMMs that are not
needed. See the previous section, "Removing a DIMM."
Before installing a DIMM, reduce static discharge
by touching the system's metal chassis.
5-16 Installing Options
Removing a DIMM
! CAUTION
Advertisement
Table of Contents
