Specifications; System Board Specifications - NEC PowerMate Enterprise Manual

T
drivers may be single-ended, active, or programmable via the SCSISelect
configuration utility
T
50-pin 8-bit internal SCSI connector for connecting optional internal SCSI
devices
T
68-pin 16-bit internal SCSI connector for connecting to the internal SCSI hard
drive (SCSI configured systems only)
T
68-pin 16-bit external SCSI connector for connecting optional external SCSI
devices.
Up to 15 SCSI devices (seven standard internal and eight 16-bit wide internal or external,
or 15 wide internal and external SCSI devices) can be connected to the adapter board.

SPECIFICATIONS

System specifications are found in Table 1-13 through Table 1-39.
Feature
System Board
Processor
Cache Memory
Flash ROM
Chip Set
I/O Controller
System Memory
Optional DIMMs
Audio Chip
Battery
Table 1-13 System Board Specifications
Specification
Intel NX440LX with AGP connector and integrated audio
3 PCI, 1 ISA, and 1 shared board slot.
Pentium II 233 MHz MMX, 266 MHz MMX, or 300 MHz
MMX
32 KB of primary cache (16-KB data, 16-KB instruction)
integrated in the MMX processor
512 KB of secondary cache built-in on processor
2 Mb Flash ROM
Intel NX440LX Chipset
SM 37C667 I/O controller
From 16 MB to 384 MB in three DIMM sockets on system
board
16-MB, 32-MB, 64-MB (as available), and 128-MB (as
available); 168-pin, 64-bit non-parity DIMMs
Yamaha OPL3-SA3
Replaceable coin-type battery
Technical Information 1-31