NEC PowerMate Enterprise Manual page 94

T
On Modem Ring
This field enables an external modem to work even when the system is in a power
reduction state. Choosing "Power On" (the default) restores the system to full
power so it can receive a modem ring. Choose "Stay off" if you do not want full
power restored on a modem ring.
T
On LAN
This field enables the system to be contacted via a LAN even when the system is
in a power reduction state. Choosing "Power On" (default) restores the system to
full power so the LAN connection can be made. Choose "Stay off" if you do not
want full power restored. Note that Restore on AC/Power Loss must be set to
either "Last State" or "Power On" for On LAN to be enabled.
T
Quick Boot Mode
This field allows the system to skip certain tests while booting. This will decrease
the time needed to boot the system. The default setting for this field is "Enabled."
T
Scan User Flash Area
The field allows the BIOS to scan the Flash ROM. Selectable parameters for this
field are "Disabled" and "Enabled." The default is "Disabled."
T
Boot Order
These fields allow you to set the order in which the system's drives boot up. The
default order is:
First Boot Device: ATAPI CD-ROM Drive
Second Boot Device: Removable Devices
Third Boot Device: Hard Disk
Fourth Boot Device: Network Boot
Fifth Boot Device: LANDesk
T
Hard Drive
This field lists the bootable hard disk drives in the system as well as bootable ISA
boards.
T
Removable Devices
This field lists the bootable removable device drives (diskette, Zip, etc.) in the
system as well as their booting order.
Setup and Operation
®
Service Agent.
2-25