Installing The Dimm Module; Removing A Dimm Module; Installing A Dimm Module - NEC POWERMATE CT 815 Service And Reference Manual

Installing the DIMM Module

Use the following steps to install a DIMM module.
Remove the cover (see "Removing the Cover" earlier in this section).
1.
If you need to remove a currently installed DIMM module, see "Removing a DIMM
2.
Module" earlier in this section.
chassis.
Grasp the new module in the middle and align the notches on the new module with the keys
3.
in an empty DIMM socket.
Press the module firmly into the socket.
4.
Make sure the plastic clips at both ends of the module click closed.
5.
Replace the cover.
6.
3-12 Disassembly and Reassembly

Removing a DIMM Module

A – Plastic Clip (2)
Before you install a module, reduce static discharge by touching the

Installing a DIMM Module

A – Plastic Clip (2) B – Notches