Appendix B Jumper Settings; System Board Jumper Settings - NEC PowerMate Enterprise Manual

Appendix B
Jumper Settings
The following sections provide jumper settings for PowerMate Enterprise computers.
Settings are included for the following components:
T
system board
T
hard disk drive
T
CD-ROM reader
T
fax/modem board.

SYSTEM BOARD JUMPER SETTINGS

PowerMate Enterprise system board jumper settings are changed under the following
circumstances:
T
to reset the password and select CPU speed
T
to perform BIOS recovery.
NOTE: Jumpers are set correctly at the factory for
the system configuration.
If the system requires a jumper change, change
only the setting for that condition. Otherwise,
keep the settings at their factory settings.
WARNING: The system power must be off
before the cover is removed.