Table of Contents
Advertisement
DIMM Removal
Use the following steps to remove a DIMM from the system board:
1.
Turn off the system and disconnect the system power cord from the power
source.
Remove the system unit cover (see "Removing the System Unit Cover").
2.
Locate the DIMM sockets on the system board.
3.
4.
Press the plastic clips at the outer edges of the DIMM socket away from the
memory module. This ejects the DIMM from the socket.
Figure 5-7 Removing a DIMM
Repair
5-9
Advertisement
Table of Contents
Troubleshooting
