Using The Bios Update Utility; Auto Insert Notification - NEC PowerMate Enterprise Manual

Using the BIOS Update Utility

Update the BIOS from the BIOS flash diskette as follows.
1. Write down the Setup parameters currently set on the system.
Turn off the system.
2.
Insert the BIOS flash diskette in drive A and turn on the system.
3.
The update proceeds automatically and shows a BIOS Update successfully
completed message when done
4. Press any key to reboot the system.
5. Remove the flash diskette.

AUTO INSERT NOTIFICATION

The computer ships with the Auto Insert Notification (auto play) feature enabled. Auto
Insert Notification allows the system to automatically start a program based on the
Windows 95 operating system on a CD as soon as the CD is inserted. The CD-ROM
reader program icon need not be clicked to start the CD.
Use the following procedure to disable Auto Insert Notification. This allows power
management features to function.
1. From the desktop, click
2. Click Properties
Click the
3. Device Manager
Double click
4.
5. Double click the listed
6. Click the Settings
7. In the Settings box under Options, deselect
8. Click OK to return to the System Properties window.
Click again to return to the desktop.
9. OK
.
My Computer
from the menu box. The system properties box appears.
tab.
to display the CD-ROM reader installed in the system.
CD-ROM
CD-ROM reader.
tab.
NOTE: When Auto Insert Notification is
disabled, the system automatically enters power
management mode after the preset time of
system inactivity.
Setup and Operation
with the right mouse button.
Auto Insert Notification
2-29
.