2-22
Setup and Operation
Security Menu
The Security Menu contains features that enable you to restrict access to the computer. The
Security menu contains the following fields.
User Password Is
This read-only field lets you determine whether a User Password has been set. This field can
be either "Clear" or "Set." The default is "Clear" (no password has been set).
When both the User Password and Supervisor Password are enabled, only the Supervisor
Password gives you full access to all Setup fields.
Supervisor Password Is
This read-only field indicates whether a Supervisor Password has been set. This field can be
either "Clear" or "Set." The default is "Clear" (no password has been set).
When both the User Password and Supervisor Password are Enabled, only the Supervisor
Password gives you full access to all Setup fields.
Set User or Supervisor Password
The password fields allow you to enable a user-level password or supervisor-level password
during POST and to enter Setup.
Use the following procedure to set a password.
Using the arrow keys, select Security from the menu bar. The Security menu
1.
appears.
Select "Set Supervisor Password" or "Set User Password" with the plus (+) or
2.
minus (-) keys.
3.
With the password field selected, press
the following prompts:
4.
Type the password (passwords are not case sensitive) and press
the password and press
Use the arrow keys to select
5.
NOTE: Once the Supervisor Password feature
is enabled, the Setup Utility can only be accessed
by entering the password.
Enter new password: [
Confirm new password: [
Enter
again.
Exit
Enter
. Setup displays a dialog box with
]
]
.
Enter
. Reenter