Table of Contents
Advertisement
Removing the AGP Video Board
To remove an AGP video board option in your system, use the following steps.
1.
Remove the system unit cover (see "Removing the System Unit Cover").
2.
Remove the screw on the rear of the chassis and carefully lift the video board out
of the AGP slot on the system board (see Figure 5-1).
NOTE: If you are removing a PCI video board,
use the removal procedures for an expansion
board (see "Expansion Board Removal").
Figure 5-1 Removing the AGP Video Board
Repair
5-3
Advertisement
Table of Contents
Troubleshooting
