Jenn-Air JES9860BAB Use & Care Manual page 13

÷
URFACE COOKING
Setting the controls for grilling:
Knob A = Exhaust fan only. Knob will not operate the grill
element.
Knob B = Exhaust fan and grill element.
Setting
the controls for
cartridges:
Knob A - Left front element.
Knob B - Left rear element.
÷
A B
Surface Controls
Use to turn on the surface elements. An infinite choice of
heat settings is available from Low to High. The knobs can
be set on or between any of the settings.
Setting the Controls
1. Place pan on surface element.
2. Push in and turn the knob in either direction to the desired
heat setting.
• The control panel is marked to identify which //
element the knob controls. For example, the _lOFront
graphic at right indicates right front element.
3. There is an element indicator light on the control panel.
When any surface control knob is turned on, the light will
turn on. The light will turn off when all the surface
elements are turned off.
When a control is turned on, a glow can be seen through
the smoothtop surface. The element will cycle on and off
to maintain the preset heat setting, even on High.
After cooking, turn knob to OFF. Remove pan.
Suggested Neat Settings
Tile size, type of cookware and cooking operation will affect
the heat setting.
High (9): Use to bring
liquid to a boil. Always
reduce setting to a lower
heat when liquids begin to
boil or foods begin to cook,
Low (1): Use to keep foods
warm and melt chocolate
and butter.
Med. Low (3):
Use to
continue
cooking
covered foods
or steam foods.
__
Meal. High (7): Use to
brown meat, heat oil for
deep fat frying or
sauteing. Maintain fast
boil for large amounts
of liquids.
/
Medium (5): Use to
maintain slow boil for
large amounts of liquids
and for most frying
operations.
÷
12
8113P527-60 13 _ 12/6/05, 8:06 AM