Power Menu - Intergraph TD-260 System Manual

5. Restart the system.
To remove the password:
1. Turn off power to the system and open the computer cover.
2. Place a jumper on J11 on the system board.
3. Turn on power to the system. The BIOS Setup maintenance screen displays.
4. Highlight the Clear Password field and press
5. Press F10 to exit BIOS Setup.
6. Turn off power to the system.
7. Remove the jumper from J11 on the system board and close the computer cover.

Power Menu

Select Power from the menu bar to display the Power menu.
Main
Resume On Modem Ring:
Resume On Time:
On PME:
Power Button Function:
AC Power Control:
F1 Help
Esc Exit
The Power menu allows you to configure your computer's sophisticated power-saving features.
Resume On Modem Ring
Enables waking the system when any incoming call arrives on an installed modem.
Resume On Time
Enables waking the system at a specific time.
Phoenix BIOS Setup Utility
Advanced Security
[Disabled]
[Disabled]
[Disabled]
[Instant-off]
[Last state]
Select Item /+ Change Values
Select Menu Enter Select + Submenu
.
ENTER
Power Boot
Item Specific Help
Enabled wakes the
System up when an
Incoming call is
Detected on your modem.
F9 Setup Defaults
F10 Save and Exit
Exit
89