Boot Menu - Intergraph TD-260 System Manual

90
On PME
This event causes a time reload or a wake-up from power-saving mode.
Power Button Function
Sets the use of the computer's power button. When set to Delay 4-Seconds, you must press the
power button and hold it for 4 seconds to turn off power to the computer; you can press and
release the power button to enter suspend mode. When set to Instant-off, pressing and
releasing the power button turns off power to the computer immediately.
AC Power Control (TD-260 desktop only)
Sets the method for applying AC power to the computer. When set to Always On, the
computer automatically starts when external power is applied. When set to Power Off, the
power button must be pressed to start the computer. When set to Last State, the computer goes
back to the last state it was in before AC power was removed.

Boot Menu

Select Boot from the menu bar to display the Boot menu.
Main
Floppy Check :
Summary screen:
Screen Logo Display:
QuicBoot Mode:
Hard Disk Pre-Delay:
1. First Boot Device
2. Second Boot Device
3. Third Boot Device
4. Fourth Boot Device
+ Hard Drive
+ Removable Devices
F1 Help
Esc Exit
The Boot menu lets you select the order in which the computer attempts to boot from different
devices.
Phoenix BIOS Setup Utility
Advanced Security
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Removable Devices]
[Hard Drive]
[ATAPI CD-ROM Drive]
[Network Boot]
Select Item /+ Change Values
Select Menu Enter Select + Submenu
Power Boot
Item Specific Help
Enabled verifies
Floppy type on boot;
Disabled speeds boot.
F9 Setup Defaults
F10 Save and Exit
Exit