How To Save And Recall A Waveform - Owon SDS series User Manual

How to Save and Recall a Waveform

Press the Save button, you can save the waveforms, settings or screen images. The
menu displayed in the screen is shown as Figure 5-36.
The description of the Save Function Menu is shown as the following table:
Function Menu
Type
When the type is Wave, the menu shows as following:
Source
Object
Object & Show
Show
Save
Storage
When the type is Setting, the menu shows as following:
5.Advanced User Guidebook
Figure 5-36 Waveform Save Menu
Setting Description
Wave
Choose the saving type
Setting
(about the Record type, see "How to
Image
Record/Playback Waveforms" on P52)
Record
CH1
CH2 Choose the waveform to be saved.
Math
Choose the address which the waveform is
1~15
saved to or recall from.
Recall or close the waveform stored in the
current object address. When the show is
ON, if the current object address has been
ON used, the stored waveform will be shown,
OFF the
information will be displayed at the top left
of the screen; if the address is empty, it
will prompt "None is saved".
Save the waveform of the source to the
selected address. Whatever the Type of
save menu is set, you can save the
waveform by just pressing the Copy panel
button in any user interface. Storage format
is BIN.
Save to internal storage or USB storage.
When External is selected, save the
waveform according to the current record
Internal
length (see "
External
the file name is editable. The waveform
file could be open by OWON waveform
analysis software (on the supplied CD).
49
address number
Record Length Menu
and relevant
" on P44);