Slope Trigger - Owon SDS series User Manual

Video menu list:
MENU SETTING
Single Mode
Source
Modu
SECAM
Sync
Line NO.
Mode
Holdoff
Holdoff

3. Slope Trigger

Slope trigger sets the oscilloscope as the positive/negative slope trigger within the
specified time.
The Slope Trigger Menu is shown as Figure 5-21.
Slope trigger menu list:
MENU SETTING
Single
Slope
Mode
CH1
Source
CH2
slope
When
5.Advanced User Guidebook
Figure 5-20 Video trigger menu
INSTRUCTION
Video Set vertical channel trigger type as video trigger
CH1 Select CH1 as the trigger source
CH2 Select CH2 as the trigger source
EXT The external trigger input
EXT/5 1/5 of the external trigger source for increasing range
of level
NTSC
PAL Select video modulation
Line Synchronic trigger in video line
Field Synchronic trigger in video field
Odd Synchronic trigger in video odd filed
Even Synchronic trigger in video even field
Synchronic trigger in designed video line, turn the M
knob to set the line number
Auto Acquire waveform even no trigger occurred
100ns~10s, adjust the M knob to set time interval
before another trigger occur
Reset Set Holdoff time as 100ns
Figure 5-21 Slope trigger menu
INSTRUCTION
Set vertical channel trigger type as slope trigger.
Select CH1 as the trigger source.
Select CH2 as the trigger source.
Slope selecting
37