To Adjust Horizontal Position - Agilent Technologies Infiniium 90000 Q-Series User Manual

To adjust horizontal position

The horizontal position is the time relative to the trigger at the
highlighted horizontal reference point.
• To zero the horizontal position, click the 0 button next to the position
• To move the waveform to the right or left, click the right or left arrow
Figure 37 Adjusting Horizontal Position
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide
value at the bottom of the waveform display.
This will position the trigger event at the highlighted horizontal
reference point.
next to the position value at the bottom of the waveform display. Or,
click and hold the mouse button on the desired waveform and drag the
waveform to the right or left. Release the mouse button when the
waveform is in the desired position.
When you click and drag a waveform, this changes the horizontal
position for all channels and functions on the display, but not that of
waveform memories.
You can also adjust the horizontal position through the horizontal setup
dialog box.
Click to set the
horizontal position
through a pop-up
numeric keypad
Using the Oscilloscope
Move the
waveform
to the left
Reset the
horizontal
position to
zero
3
Move the
waveform to
the right
69