Installing Application Programs On Infiniium - Agilent Technologies Infiniium 90000 Q-Series User Manual

1
Setting Up the Oscilloscope
5
6

Installing application programs on Infiniium

Infiniium has an open Windows operating system, which lets you install
your own application software. Agilent has verified that the following
applications are compatible with the Infiniium oscilloscope application.
• Agilent Vector Signal Analysis.
• Agilent VEE Pro.
• Amherst Systems Oscilloscope Tools.
• Microsoft Office.
• MathWorks MATLAB.
• Mathsoft MathCad 2001i.
• McAfee VirusScan.
• Symantec Norton AntiVirus.
Before installing any software, you should exit the oscilloscope application.
N O T E
If you install an application other than those which Agilent has tested, it
is possible that it could break the oscilloscope application. This would
potentially require you to recover the oscilloscope hard drive using the
hard drive's hidden recovery partition.
24
The display will pause momentarily while the oscilloscope adjusts the
time/div setting and vertical scale. You should then see a square wave
with about four cycles on screen and a peak- to- peak amplitude of
approximately 4 divisions.
If you do not see the waveform, make sure your power source is
adequate, the oscilloscope is properly powered on, and the probe is
connected securely to the front- panel channel input and to the probe
calibration output.
Move the mouse around the mouse surface and verify that the
on- screen pointer follows the mouse movement.
Touch the pointer of the touch screen stylus to the surface of the
screen and move it around while verifying that the pointer follows the
movement.
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide