To Connect Power - Agilent Technologies Infiniium 90000 Q-Series User Manual

1
Setting Up the Oscilloscope

To connect power

Table 3
Power
1
Use only power cords designed for your oscilloscope.
C A U T I O N
The line cord provided is matched by Agilent to the country of origin of the order.
Figure 3
To avoid electric shock, be sure the oscilloscope is properly grounded.
WA R N I N G
18
Power Requirements
Connect the power cord to the rear of the oscilloscope, then to a
suitable AC voltage source.
90000 Q-Series Oscilloscope Power Cord Connection
100 - 240 VAC +-10% at 50/60 Hz;
Typical input power for models <= 33 GHz 1280 Watts
Maximum input power for models > 33 GHz 1350 Watts
Well regulated power is required for 100-120VAC operation
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide