To Adjust The Horizontal (Time/Div) Scale; To Adjust The Horizontal Delay (Position) - Agilent Technologies 4000 X-Series User Manual

To adjust the horizontal (time/div) scale

1 Turn the large horizontal scale (sweep speed) knob marked
Notice how the time/div information in the status line changes.
The
The horizontal scale knob works (in the Normal time mode) while
acquisitions are running or when they are stopped. When running,
adjusting the horizontal scale knob changes the sample rate. When
stopped, adjusting the horizontal scale knob lets you zoom into acquired
data. See
page 66.
Note that the horizontal scale knob has a different purpose in the Zoom
display. See

To adjust the horizontal delay (position)

1 Turn the horizontal delay (position) knob (
Changing the delay time moves the trigger point (solid inverted triangle)
horizontally and indicates how far it is from the time reference point
(hollow inverted triangle
the top of the display grid.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
change the horizontal time/div setting.
You can also make this adjustment using the touchscreen. See
the Horizontal Menu and Open the Scale/Delay Dialog"
symbol at the top of the display indicates the time reference point.
"Panning and Zooming Single or Stopped Acquisitions"
"To display the zoomed time base"
The trigger point moves horizontally, pausing at 0.00 s (mimicking a
mechanical detent), and the delay value is displayed in the status line.
You can also make this adjustment using the touchscreen. See
Waveforms Left and Right to Change the Horizontal Position"
page 46 and "Access the Horizontal Menu and Open the Scale/Delay
Dialog" on page 54.
). These reference points are indicated along
Horizontal Controls
"Access
on page 54.
on
on page 71.
).
"Drag
on
2
to
65