Removable Hard Drive; To Recover Your Infiniium Hard Disk; Infiniium Hard Drive Recovery - Agilent Technologies Infiniium 90000 Q-Series User Manual

3
Using the Oscilloscope

Removable Hard Drive

The Infiniium 90000 Q- Series oscilloscopes have a removable hard drive.
Power down the instrument before removal or insertion of a removable hard drive.
C A U T I O N

To recover your Infiniium hard disk

The Infiniium hard disk recovery system is contained in a hidden partition
on the Infiniium hard disk. If you have to use the recovery system, the
Infiniium hard disk is returned to the condition it was in when it left the
factory. Before recovering the Infiniium hard disk, use the following
procedure to return the Infiniium to normal operation.
1
2
3

Infiniium Hard Drive Recovery

Use the following instructions to recover your Infiniium hard drive.
1
2
3
4
5
6
78
Turn off the Infiniium.
Turn on the Infiniium. If the oscilloscope does not successfully restart
then try recycling the power again.
After the Windows 7 load screen disappears, press and release the
Infiniium [Default Setup] key on the front panel. If the oscilloscope still
does not successfully restart, follow the instructions for recovering the
hard drive.
Turn off the Infiniium.
Connect the keyboard to the keyboard connector on the rear panel of
the oscilloscope.
Connect the mouse to the mouse connector on the rear panel of the
oscilloscope.
Turn on the Infiniium.
When you see the message press F2 to boot the Infiniium Recovery
System, press F2 and follow the on- screen instructions.
Once the recovery process is finished and the oscilloscope is running,
check in the About Infiniium dialog box under installed options to see
if all of the options you ordered are installed. If the options are not
installed, please install them using the license keys provided on the
oscilloscope option license certificates you received, or refer to the rear
panel of the oscilloscope.
Agilent Infiniium 90000 Q-Series Oscilloscopes User's Guide